A bio resonance scan uses electrical voltage signals to determine pathogenic activity as pathogens resonate increases power use which is detected and recorded.

Unlike other biofeedback methods, Generator X does not need the contact pads far apart. In fact, it is better to have them very close together. Generator X can perform biofeedback scans much quicker than Spooky Pulse. There are two reasons: Generator X is detecting electrical signals which travel very fast; The response detected is a measurement of the electrical signals and does not rely on a physiological response like a heart beat or perspiration.

Generator X can perform biofeedback scans much quicker. There are two reasons: Generator X is detecting electrical signals which travel very fast; The response detected is a measurement of the electrical signals and does not rely on a physiological response like a heart beat or perspiration.

It is like trying to listen to music while having children playing nearby. It is better to be close to the music player so the sound is clearer. So we recommend that the TENS pads be placed as close as possible to the problem area.

There is no limit to how close you can place the TENS pads. There are instances where you can have them 1mm (0.04 inches) apart. In fact, the accuracy of the results become greater the closer you have them.

If you only have bad cells between the pads, the results will be pure and super-accurate. There are fewer good cells to add unwanted signals to the result.

The starter membership assumes you know what's wrong. After telling us what you think is wrong we will find the frequencies from the database that relate to the mortal oscillation rates of your target pathogens and run them in scan mode to establish the signals that correlate with your target resonant frequencies. Once identified we suggest application of frequencies by contact mode using boost then we find that a regrade works well to reorder and then use the refined frequencies for plasma application then we regrade and run on remote for 48 hours. Single applications work well for acute issues chronic issues require 6 - 12 months and we will suggest you get your own generator and set you up using our extensive knowledge gained from experience.

1. Bio resonance scans determine appropriate frequencies using electrical signals.

2. Bio resonance scans determine appropriate frequencies for known concerns.

3. Grading the the top twenty-five frequencies from full bio resonance scan and known concerns frequencies combines general and specific frequencies and produces the top ten.

4. Take the resulting ten frequencies and optimise or refine the top three using spooky pulse or all using generator x.

5. Create a program using the graded, refined top three frequencies followed by the following seven highest graded frequencies.

6. Run each frequency for three minutes totaling thirty-minute run time. Run the program twice a day and use plasma, contact and remote modes for best affect.

Discontinue use at 20v amplitude if it makes you ill and and the next day reduce amplitude to 7v and work back up. It is recommended to run detox helper frequencies by remote at the same time or following with a single generator.

Dr. Royal Raymond Rife was an extremely intelligent inventor and a pioneer in carcinogens. During the 1930s, he designed several optical microscopes that could observe the virus. With the help of those microscopes, he invented the theory of the Rife machine and successfully proved beneficial outcomes on human bodies in 1934. In 1971, Dr. Royal Raymond Rife died of a heart attack in California. How did such a scientific giant die of a heart attack?

As we know, 16 hopeless cancer patients accepted frequencies conducted by Rife at the Scripps Institute in La Jolla, CA in 1934. In the first three months, Rife frequencies benefited 14 out of 16 patients. Another 6 weeks later, the other two patients also benefited from the frequencies. A team of medical specialists assigned by the University of South California confirmed this big achievement.

 In 1938, Rife formed a corporation called “Beam Rays Incorporated” with his partners. One year later, because of some shady business going on with the sale of shares and some other reasons, the corporation was sued and taken to court. Once the trial began, Rife was totally isolated by AMA and its members. This trial completely frustrated him and ended in tragedy. In this battle, Rife almost lost everything including the corporation and support from the scientific community. After the trial, Rife began to use alcohol to calm his nerves.

If the court case in 1939 was a disaster for Rife’s career, then the year of 1957 would be a calamity for his life. In 1957, Rife’s wife died after spending 45 happy years with him. She married him in 1912, and since then, she had been his greatest support during ups and downs in all those years. We could only imagine how that feels to lose the love of one’s life. Just like many people, Rife started to drink more often to ease himself.

Blows from both career and life knocked this scientific genius down and continued the drinking problem till the end. Late in life, Rife even began to take Valium sometimes in drinking to help his sleep. On August 11, 1971, at Grossman Hospital in El Cajon, California, he died of 83 years-old after a heart attack caused by the overdose of the combination of alcohol and Valium.

It’s a shame that such a genius died so tragic. But on the bright side, he still left us a big fortune, his theory of frequency. It’s said that the Rife machine also benefited his wife’s back which was struck by lightning and extended Rife’s life. While we are still exploring in this field, we hope to bring benefit to more people as Rife intended. If you want to buy a modern Rife machine please click the image below or visit the Spooky2 website.

A Rife Machine uses the principles of Royal Rife, a brilliant scientist who lived during the last century. He discovered that micro-organisms can be destroyed using frequencies.

He performed thousands of experiments, each proving that cancer has a viral cause, and that damaging this virus usually resulted in a beneficial outcome.

As a final test, the University of Southern California appointed a Special Medical Research Committee to bring terminal cancer patients from Pasadena County Hospital to a San Diego lab and clinic for frequency application. The team included doctors and pathologists assigned to examine cadavers and any patients still alive in 90 days.

After 90 days, the Committee found that 86.5% of the patients had benefited. The frequencies were then adjusted, and the remaining people also responded within four weeks. The total benefit rate was 100%.

How Much Does A Rife Machine Cost?

Spooky2 provided the world a Rife machine that everyone can easily afford. It is the most highly advanced and versatile Rife machine in the world. Spooky2 was developed over the past 6 years by an international team of electronics engineers, technical designers, software developers, and Rife practitioners. All determined to benefit those with disease.

The Spooky2 software is free. It has the largest database in the world, and it continues to grow. You can download Spooky2 software and use it for your own research. You don’t even need to spend any money. You can create your own audio frequencies and use them. For free.

Spooky2 can get you started on Rifing you can do all three effective transmission modes, which are contact, remote, and cold laser. You will also be able to perform biofeedback scans on your body, to discover the frequencies that will be beneficial to your body. Bio Resonance Scan Global Private Members Club recommends everyone gets their own Rife machine and our members are here to help other members get started with optimised settings specific to individual environments. Members are available to share their equipment and time for those members wishing to try Rife technology before they invest in their own rigs.

Why Rife Was Able to Identify Frequencies We Have Trouble Finding Today?

Frequencies using microscopes such a long time ago, but we find it difficult today?

Rife invented a microscope capable of magnifications of 31,000 times. He could resolve and see viruses and bacteria no one else could, and while it was alive and moving. He could then apply frequencies to the pathogens and watch them die. Even today, we struggle to match the resolution achieved by Royal Rife’s microscopes.

So how did Rife design such a powerful microscope?

He understood how to build a microscope that separated light into distinct frequency bands, carried by oil not air, and then re-constituted it for viewing - surpassing the limitation of optical techniques which are still used today. It was by this very feat that he realized that the microbes he was viewing were too small to be stained. The stain was bigger than the bug. So he found a way to make them glow using specific bands of light. Then the thought occurred to him; if he could make them glow with a frequency of light, maybe he could kill them with frequencies as well.

The rest is history. Electron Microscopes long ago surpassed the 60,000 magnification that Rife achieved, but they kill the subject in the process. Not terribly useful if you are trying to observe live subjects.

Bio Resonance Scan Private Members are unable to discuss medical treatments in public. If you want medical advice please contact a registered medical professional.

Membership includes private member to member bio resonance scanning and frequency applications.

Bio Resistant Resonance Scan Private Members are able to pre book appointments in Stevenage.

Currently bio resonance scans and frequency applications are available at Biggleswade in Bedfordshire.Home visit members always use full personal protection equipment as per the current guidelines.

Got a spooky2 Rife machine? Become a member and open up new areas!

Terrain Protocol

The Terrain protocol prepares the terrain in your body to be more available or receptive to further Rife treatments. This protocol was developed by Johann Stegmann, based on his experience of treating people using Spooky with their chronic disease. He found that people responded better to Rife treatment when common toxins and parasites eliminated beforehand. The first Terrain protocol was a document that described programs to run on a daily basis. These programs selected by Johann are incorporated into the Spooky Terrain protocol presets.

When running the Terrain protocol, make sure you keep yourself well hydrated to aid the elimination of toxins from your body.
This protocol can be run on a single Spooky Remote, but is enhanced if you run it concurrently with either Plasma, Scalar, Contact, Laser, or Coil mode. There are 3 flavors of the Terrain protocol — the original protocol (Terrain), a version without the mercury-detox frequencies (Terrain-
Mercury), and a version that does not kill bacteria or parasites (Terrain-Nonviolent). Each of the different flavors has a Plasma Plus (2 generator), Contact Plus (2 generator), Plasma or Contact (1 generator), and Remote (1 generator) version.

Plasma Plus (2 Generator)

The Plasma Plus version of the Terrain protocol uses two generators. Generator 1 runs presets in \Detox\Plasma\ on Spooky Central/Plasma. Generator 2 runs \Detox\Remote\Terrain (R) - BY on Spooky Remote. While Generator 1 is connected to Spooky Central/Plasma, you run
2 sets a day as specified in the Generator 1 column in the table below, preferably with 6 hours of time between each set.

Each plasma set lasts 2 hours, and is followed by a beep. Run the first set the first thing in the morning, then 6-12 hours later run the second set. Optionally you can repeat each set more than once, spread out through the day. Generator 2 is connected to the Spooky2 Remote hardware, to the BN port of Spooky Boost or to Out 1

Contact Plus (2 generators)

The Contact Plus version of the Terrain protocol uses two generators. Generator 1 runs presets in \Detox\Contact\.
Generator 2 runs \Detox\Remote\Terrain (R) - BY. While Generator 1 is connected to Contact hardware (Spooky Cylinders or TENS pads), you run 2 sets a day as specified in the Generator 1 column in the table below. Each Contact set lasts 2 hours, and is followed by a beep. Run the first set the
first thing in the morning, then 6-12 hours later run the second set. Optionally you can repeat each set more than once, spread out through the day. Generator 2 is connected to the Spooky2 Remote hardware, to the BN port of Spooky Boost or to Out 1.

Scalar Plus (2 generators)

The Scalar Plus version of the Terrain protocol uses two generators. Generator 1 runs presets in \Detox\Scalar\ on Spooky Scalar. Generator 2 runs \Detox\Remote\Terrain (R) - BY on Spooky Remote. While Generator 1 Out 1 is connected to Spooky Scalar, you run 2 sets a day as specified in the
Generator 1 column in the table below, preferably with 6 hours of time between each set. Each plasma set lasts 2 hours, and is followed by a beep. Run the first set the first thing in the morning, then 6-12 hours later run the second set.

Optionally you can repeat each set more than once, spread out through the day. Generator 2 is connected to the Spooky2 Remote hardware, to the BN port of Spooky Boost or to Out 1.

Laser Plus (2 generators)

The Laser Plus version of the Terrain protocol uses two generators. Generator 1 runs presets in \Detox\Laser\ on Spooky Laser. Generator 2 runs \Detox\Remote\Terrain (R) - BY on Spooky Remote. While Generator 1 Out 1 is connected to Spooky Laser, you run 2 sets a day as specified in the
Generator 1 column in the table below, preferably with 6 hours of time between each set. Each plasma set lasts 2 hours, and is followed by a beep. Run the first set the first thing in the morning, then 6-12 hours later run the second set.
Optionally you can repeat each set more than once, spread out through the day. Generator 2 is connected to the Spooky2 Remote hardware, to the BN port of Spooky Boost or to Out 1.

 Coil Plus (2 generators)

 The Coil Plus version of the Terrain protocol uses two generators. Generator 1 runs presets in \Detox\Coil\ on Spooky Coil. Generator 2 runs \Detox\Remote\Terrain (R) - BY on Spooky Remote. While Generator 1 is connected to Spooky Coil, you run 2 sets a day as specified in the Generator 1 column in the table below, preferably with 6 hours of time between each set. Each plasma set lasts 2 hours, and is followed by a beep. Run the first set the first thing in the morning, then 6-12 hours later run the second set.
Optionally you can repeat each set more than once, spread out through the day. Generator 2 is connected to the Spooky2 Remote hardware, to the BN port of Spooky Boost or to Out 1.

 Plasma, contact, scalar, laser or coil (1 generator)

 If you only have one generator, twice each day you connect the plasma/contact/scalar/laser/coil hardware to your generator, and run the program specified in the Generator 1 column of the plasma/contact/scalar/laser/coil table below.
After you finish each plasma or contact set, safely disconnect the plasma/contact/scalar/laser/coil hardware from your generator and then connect Spooky Remote hardware to the generator, and run the corresponding set from \Detox\Remote\Terrain - BY.
To skip to a specific day in the \Detox\Remote\Terrain - BY preset, load the preset into a Generator control, type a preset number into the Preset text field (see table below), type Tab, and then click Start. Some days have 2 child presets, use the 1st child preset in the 1st session, the 2nd child preset in the 2nd session.